Nanni 4.390TDi User Manual
  1. Manuals
  2. Brands
  3. Nanni Manuals
  4. Engine
  5. 4.390 TDI
  6. User manual
Nanni 4.390TDi User Manual

Nanni 4.390TDi User Manual

Hide thumbs Also See for 4.390TDi:
Table of Contents

Advertisement

Quick Links

See also: Workshop Manual , Instruction Manual
User manual
Reference: 970 313 180

TABLE OF CONTENTS

1. INTRODUCTION
•
Presentation
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Detailed operations
•
•
*All the information and specifications contained in
this manual are based on the technical data applicable
on the date of publication. This manual is subject to
modifications and updates.
NANNIDIESEL
Uses and recommends
SAFETY SYMBOLS
The following symbols are used in the manual to
indicate a safety hazard. The symbols are intended to
draw your attention to elements or operations which
could be hazardous to you or other users of this engine.
Carefully read the safety guidelines given with these
symbols. Be sure to read the safety instructions and
rules before commissioning your engine.
DANGER
This symbol refers to an extremely serious danger
with high probability of resulting death or
irreparable physical injury if specific, appropriate
measures are not taken.
User manual for NANNI DIESEL engines
WARNING
This refers to a danger which could result in serious
p.1
physical injury or death if specific, appropriate
measures are not taken..
CAUTION
This symbol is used to indicate safety measures or to
draw your attention to dangerous practices which
p.5
could result in physical injury or damage to the boat
or its components.
p.6
The engine user should take all the necessary
precautions relative to handling and protection and
p.8
should contact a professional for advice whenever
necessary
Failure to observe the safety instructions can result in :
Physical hazards, danger of environmental pollution
p.10
(dangerous substance leaks), danger to equipment with
risk of failure of essential engine functions).
p.11
This symbol refers to important instructions relative to
protection of the environment.
p.15
1.INTRODUCTION
•
Thank you and congratulations for purchasing a
NANNI DIESEL product.
p.23
Your NANNI DIESEL engine is a product of NANNI
INDUSTRIES quality engineering and production.
Your engine is built with the finest materials in
accordance with precise specifications and strict
production methods.
Your NANNI DIESEL engine will provide you with a
reliable source of power for your boat for many years to
come.
Correct installation of the engine on your boat is of the
greatest importance for safe navigation and protection
of the environment.
Our engineers at NANNI INDUSTRIES are among
the world's finest. Their experience and knowledge
of the sea, combined with the technical skills and
experience of the engineering teams at MAN,
KUBOTA and TOYOTA guaranty you the highest
level of performance, reliability and savings
available.
WARNING: Your engine must be
Shipyard or a representative qualified by NANNI
INDUSTRIES
installation instructions.
ENVIRONMENT
Presentation
in compliance of the on-board
installed
by a
Page 3 sur 24

Advertisement

Table of Contents
loading

Related Manuals for Nanni 4.390TDi

Summary of Contents for Nanni 4.390TDi

  • Page 1: Table Of Contents

    Extended storage NANNI DIESEL product. 8. TROUBLESHOOTING p.23 Your NANNI DIESEL engine is a product of NANNI INDUSTRIES quality engineering and production. *All the information and specifications contained in Your engine is built with the finest materials in this manual are based on the technical data applicable accordance with precise specifications and strict on the date of publication.

  • Page 2: Servicing And Spare Parts

    This symbol, indicated on the engine, instructions detailed in this manual. means that you must read the manual before performing All maintenance must be performed by a NANNI any operations on the engine. INDUSTRIES-approved specialist. Component...
  • Page 3 This symbol locates the engine heat exchanger Always use fuels and lubricants recommended by port. NANNI DIESEL EXHAUST GAS PREVENTION This symbol locates the oil drain drain port. Run the engine in a properly ventilated space, clear of people and animals.

  • Page 4: Protection Of The Environment

    User Manual • Protection of the environment The sea is a wonderful playground for pleasure boaters. Throughout time, it has nourished our imagination through such major authors as Jules Verne or Hemingway. The aquatic environment is possibly the least known of our planet which represents a wealth of unknown resources and an ocean of mystery.

  • Page 5: Life At Sea

    Do not is concerned. paint the hull over an area of 40mm around the stern- Nanni Diesel can supply a first-aid kit which we drive. recommend that you have on board. For (extended) anchoring, vegetation can occur on the hull, on the keel and rudder, significantly penalizing the dynamic qualities of the boat.

  • Page 6: Engine Identification

    User Manual Safety guidelines: Safety The safety equipment is primordial. equipment It is there to ensure your safety and 3.ENGINE IDENTIFICATION the safety of your passengers. Make sure your safety equipment is On all correspondence, requests for information and in good operating condition and is spare parts orders, you must indicate the information not obsolete.
  • Page 7 User manual Identification of main components : N. Designation Page Function Alternator Alternator belt A-9/A-4 Electrical connector Starter Electric motor stopping system Battery (-) connecting cable=ground cable Startup relay Air heater / preheating relay Neutral safety contactor 10 Air filter A-9/A-5 11 Injection pump 12 Booster pump...

  • Page 8: Installing The Engine

    (see pA-6 and pA-7). by thermal conductivity between the envelope and the seawater. WARNING: Your engine must be installed Shipyard or a qualified representative of NANNI • Preparation before commissioning INDUSTRIES in compliance with the on-board installation instructions.
  • Page 9 User manual Note: Modern diesel engines are precision machines Closed circuit with coolant which require high quality fuel and lubricant. This circuit comprises a pump driven by a crankshaft through V-belt(s), a water temperature exchanger (or an Lubrication of Engine and Gearbox exchanger body for a «...

  • Page 10: Operating Precautions

    User Manual 5. OPERATING PRECAUTIONS • Engine and fluid recommendations To maintain your engine's mechanical qualities and extend its service life, we recommend that you observe the following rules: No Rule Details Observe running-in A new engine is not ready to operate at its full capacity. Applying heavy loads period: first 50 hours of can reduce the engine's service life.

  • Page 11: Operation

    These inspections are required to validate the warranty. The inspections must be ensured by an approved If the temperature increases abnormally or if one NANNI DIESEL representative. or several indicator lights remain lit, correct the cause All new engines are guarantied against defective parts...

  • Page 12: Instrumentation

    User Manual The instruments illustrated are often safety indicator lights; take your time to familiarize yourself • Instrumentation with these. Don't hesitate to regularly check these when running the engine. This section gives a complete list of the various functional instruments and indicators at this time with our marine engines.
  • Page 13 User manual No Name Function Type Indicates engine rpm speed. Tachometer and hourmeter Do not push the engine to a high rpm speed when cold. We recommend sailing at a cruise speed 200 rpm below the rated rpm speed. The hourmeter records the engine operating hours. Indicates battery voltage.

  • Page 14: Operating Table

    User Manual • Operating table Startup procedure After startup In operation Stopping the boat and engine • 1. Open hold 1. Place the control lever 1. Place the control lever Check the gauges and panel(s) to fully ventilate in the idle position and in the neutral position.

  • Page 15: Servicing And Maintenance

    If you notice any suspicious spots, the electrical equipment: call a NANNI INDUSTRIES After-Sales Service Never inspect the system when the engine is partner. running: electrocution hazard.

  • Page 16: Servicing And Maintenance Tables

    To observe the warranty conditions, all the interventions must be performed by a specialized technician approved by NANNI INDUSTRIES. However, certain regular checks (to be performed "on each use") can only be performed by the owner. When the warranty has expired, an experienced owner may be able to perform certain basic operations.
  • Page 17 User manual Maintenance performed by dealer Operation Type Frequency Component (C/A/N/ After 20 h then every Fuel supply Fuel filter 100h or once yearly Zinc anode After 20 h then every Cooling 100h or once yearly Control unit: inspection of accelerator / gearbox and After 20 h then every 100h or once yearly trolling cables, general lubrication...

  • Page 18: Logbook

    User Manual Logbook Year Date of last Date of last Date of last 100 hour inspection 200 hour inspection 400 hour inspection year year year year year year year year year year The 200 hour overhauls include the operations specific to those performed at 100 hours. The 400 hour overhauls include the operations specific to those performed at 100 hours and 200 hours.
  • Page 19 -Servicing interventions and operations must be Loosen the purge screw on the fuel filter bracket. performed in a workshop approved by NANNI Actuate the priming pump (if equipped). Unlock the DIESEL.
  • Page 20 Remove the cover. Remove the filter. Clean the housing run, this means the water intake is too great and you of any debris which it may contain. Rinse the filter and should contact your NANNI INDUSTRIES-approved housing with fresh water. Check the condition of the dealer.
  • Page 21 - If the rotor shows any signs of cracks or defects, it water and to dry it. should be replaced. NANNI DIESEL has designed a cleaning kit which is -Clean the parts preserved. suited to certain models of the air filter.

  • Page 22: Wintering

    Before removing the boat from the water for winter or with fresh water. off-season, contact a NANNI INDUSTRIES – approved -Close the seawater intake valve. shop to check the engine and other equipment.
  • Page 23 User manual Fault observed : Engine does not start up / starter does not turn Cause Corrective action Breaker open or fuse has burnt Check and reinstall the breaker or replace the fuse or Electrical breaker does not operate have the breaker repaired (TQAN) Control not in neutral Place the lever in the neutral position Battery switch open...
  • Page 24 User Manual Order form for user manual in your language. You can obtain a user manual in your language by downloading it on the internet at: http://www.nannidiesel.com/ Si desees obtener un manual de instrucciones en espanol, el download se hace por internet: http://www.nannidiesel.com/ Wenn Sie die Gebrauchsanleitung in Ihrer Sprache benötigen, können Sie sie auf unserer http://www.nannidiesel.com/...

Table of Contents