JVC KD-ADV5380 Instructions Manual page 36

Dvd/cd receiver
Hide thumbs Also See for KD-ADV5380:
Table of Contents

Advertisement

Available languages

Available languages

General settings—PSM
• If you change the "AMP GAIN" setting from "HIGH
PWR" to "LOW PWR" while the volume level is set
higher than "VOL 30," the unit automatically changes
the volume level to "VOL 30."
Disc setup menu
• When the language you have selected is not recorded
on a disc, the original language is automatically used
as the initial language. In addition, for some discs,
the initial languages settings will not work as you set
due to their internal disc programming.
• When you select "16:9" for a picture whose aspect
ratio is 4:3, the picture slightly changes due to the
process for converting the picture width.
• Even if "4:3 PAN SCAN" is selected, the screen size
may become "4:3 LETTERBOX" for some discs.
Output signals through the DIGITAL OUT terminal
Output signals are different depending on the "DIGITAL AUDIO OUTPUT" setting on the setup menu (see page
31).
Playback Disc
DVD-Video 48 kHz, 16/20/24 bits
Linear PCM
96 kHz, Linear PCM
Dolby Digital
DTS
MPEG Audio
Audio CD, Video CD
Audio CD with DTS
DivX
Dolby Digital
MPEG Audio
MPEG
MP3/WMA
WAV
* Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the
discs are not copy-protected.
36
About sounds reproduced through the rear
terminals
• Through the analog terminals (Speaker
out/LINE OUT): 2-channel signal is emitted.
When playing a multi-channel encoded disc,
multi-channel signals are downmixed. DTS sound
cannot be reproduced. (AUDIO—DOWN MIX: see
page 31.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, DTS,
MPEG Audio) are emitted through this terminal.
(For more details, see table below.)
To reproduce multi-channel sounds such as
Dolby Digital, DTS, and MPEG Audio, connect an
amplifier or a decoder compatible with these
multi-channel sources to this terminal, and set
"DIGITAL AUDIO OUTPUT" correctly. (See page 31.)
STREAM/PCM
DOLBY DIGITAL/PCM
48 kHz, 16 bits stereo Linear PCM *
48 kHz, 16 bits stereo Linear PCM
Dolby Digital bitstream
DTS bitstream
MPEG bitstream
48 kHz, 16 bits stereo Linear PCM
44.1 kHz, 16 bits stereo Linear PCM /
48 kHz, 16 bits stereo Linear PCM
DTS bitstream
Dolby Digital bitstream
32/44.1/48 kHz, 16 bits Linear PCM
44.1/48 kHz, 16 bits Linear PCM
32/44.1/48 kHz, 16 bits Linear PCM
44.1 kHz, 16 bits stereo Linear PCM
Output Signal
PCM ONLY
48 kHz, 16 bits
stereo Linear PCM
48 kHz, 16 bits
stereo Linear PCM
OFF
OFF

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kd-dv5300

Table of Contents