Panasonic KX-TGL430 Operating Instructions Manual page 31

n From the phonebook:
1
MMENUN#268
2
MbN: "On" a MSELECTN
3
MbN: Select "Outgoing call" to
monitor from outside. a MADDN
4
MbN: "Phonebook" a MSELECTN
5
MbN: Select the phonebook entry. a
MSAVEN
R "Baby monitor" will be displayed.
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n By entering phone numbers:
1
MMENUN#268
2
MbN: "On" a MSELECTN
3
MbN: Select "Outgoing call" to
monitor from outside. a MADDN
4
MbN: "Manual" a MSELECTN
5
Enter the desired name. a MOKN
6
Enter the desired number. a MOKN
a MSELECTN
R "Baby monitor" will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to "On".
1
Press MMENUN on the handset being
monitored.
2
MbN: "On/Off" a MSELECTN
3
MbN: "Off" a MSELECTN a MOFFN
Editing an outside monitoring number
1
Press MMENUN on the handset being
monitored.
2
MbN: "On/Off" a MSELECTN
3
MbN: "On" a MSELECTN
4
MbN: Select the outside line.
5
MMENUN a MbN: "Edit" a MSELECTN
For assistance, please visit http://shop.panasonic.com/support
TGL43x(en)_1117_ver041.pdf
6
7
Erasing an outside monitoring
number
1
2
3
4
5
6
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
1
2
3
Answering the baby monitor
n When monitoring with a handset:
Note:
R If you receive an outside call when
n When monitoring from outside:
31
Programming
Edit the name if necessary. a MOKN
Edit the phone number if necessary. a
MOKN a MSELECTN
Press MMENUN on the handset being
monitored.
MbN: "On/Off" a MSELECTN
MbN: "On" a MSELECTN
MbN: Select the outside line.
MMENUN a MbN: "Erase" a MSELECTN
MbN: "Yes" a MSELECTN a MOFFN
monitoring call.
Press MMENUN on the handset being
monitored.
MbN: "Sensitivity level" a
MSELECTN
MbN: Select the desired setting. a
MSAVEN a MOFFN
Press M /ZN to answer a call.
If you want to respond from the monitoring
unit, press MDN (Mute).
R The monitoring unit will answer calls
automatically when the auto intercom
feature is set to "On" (page 17).
communicating with the monitored handset,
the interrupt tone sounds. To answer the
call, press MOFFN, then press M
Answer the call.
2015/11/17 16:08:03
/ZN.
31