Setting The Central Heating Times - Baxi Platinum 2 Combi 28 GA User's Operating Instructions & Important Warranty Information

04. November 2008 08:50
Tuesday
1.6 bar
Easy Menu
Button
i-THINK Controller
NOTE: When fitting the boiler to an existing
installation it may be desired to retain the external
control system already in place. In such circumstances
the i-THINK Controller should be set to 'On' heating
operation with no timed periods - see Section 5.1
Selecting the Central Heating Mode (as the external
control system will control the timed periods).
The basic display is shown.
If the basic display is not
showing, press the MENU
button. until the
basic display is shown
Turn the Selector Button
clockwise to highlight 'Time
central heating CH1'.
Press the Selector Button and
the day / days regime flashes.
Turn Button to the required
day or days Mon-Sun, Mon-
Fri, Sat-Sun
Mon, Tue, Wed,
Thu, Fri, Sat, Sun
Press Selector
Button to select.
Press the Selector Button and
the time program regime flashes.
Turn Button to the 'Time setting
1'. Press Selector Button to
select and the screen goes back
to STEP 6.
© Baxi Heating UK Ltd 2011
Menu Button
Selector Button
STEP 1
04. November 2008 08:50
Tuesday
1.6 bar
STEP 3
Operator section
Time central heating CH1
Time central heating CH3
STEP 5
Time cental heating CH1
Select days
Mon - Sun
STEP 7
Time central heating CH1
Mon - Sun
Set to Time setting 1

4.0 Setting the Central Heating Times

4.1
The i-THINK Controller enables control of up to three periods a
day, seven days a week.
Display Screen
There are 3 time programs preinstalled to aid reprogramming:-
Time program 1 has 3 time periods - Mon-Sun, 6-9, 11-12 and
15-22.
Time program 2 has two time switch periods - Mon-Sun, 6-9
and 15-22.
Time program 3 has one time switch period 6-22.
'Preselection' regimes are: Mon-Sun (Default) Mon-Fri and Sat-Sun
or each day individually.
If there are two heating circuits with two Programmer and Room
Sensors, each room/floor must be programmed using the
respective Programmer and Room Sensor. Choose the relevant
heating circuit at STEP 3.
When programming individual days, the opportunity to copy one
day to another is offered (screen 529). Lastly screen 536 enables a
reset to the default values as given above.
Press the MENU button.
Press the Selector Button to
select .
Turn the Selector Button one
click clockwise.
Turn the Selector Button one
click clockwise.
Programming the Central Heating Times
STEP 2
---------------------------------------------------
Information
Set time and date
STEP 4
Time central heating CH1
Select days
Mon - Sun
STEP 6
Time central heating CH1
Mon - Sun
Select default timings?
STEP 8
Time central heating CH1
Mon - Sun: 1st Time ON
06:00
7