Electrical Requirements - Haier HMV1640AHB User Manual

ELECTRICAL REQUIREMENTS

Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
Observe all governing codes and ordinances.
Required:
A 120 volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a fuse or circuit
breaker.
Recommended:
A time-delay fuse or time-delay circuit breaker.
A separate circuit serving only this microwave oven.
GROUNDING INSTRUCTIONS
For all cord connected
appliances:
•
The microwave oven must
be grounded. In the event
of an electrical short circuit,
grounding reduces the risk of
electric shock by providing an
escape wire for the electric
current. The microwave
oven is equipped with a cord
having a grounding wire
with a grounding plug. The
plug must be plugged into
an outlet that is properly
installed and grounded.
SAVE THESE INSTRUCTIONS
This device complies with Part 18 of the FCC Rules.
6
WARNING
Electrical Shock Hazard
WARNING: Improper use of
the grounding plug can result
in a risk of electric shock.
Consult a qualified electrician
or serviceman if the grounding
instructions are not completely
understood, or if doubt exists as
to whether the microwave oven
is properly grounded.
Do not use an extension cord.
If the power supply cord is too
short, have a qualified electrician
or serviceman install an outlet
near the microwave oven.