Table of Contents
Advertisement
[CRT]; [HDMI]; [LVDS]; [HDMI+LVDS]; [CRT+LVDS].
In the case IGFX-Boot Type is set as [HDMI], the following setting item shall
appear:
Active LFP
The optional settings are: [Disable LVDS]; [Enable LVDS].
In the case IGFX-Boot Type is set as [LVDS], [HDMI+LVDS], [CRT+LVDS], the
following setting item shall appear:
LCD Panel Type:
The optional settings are: [1024 x 600]; [800 x 600]; [1024 x 768 18bit]; [1366 x
768]; [1024 x 768 24 bit]; [1200 x 800].
Active LFP
The optional settings are: [Disable LVDS]; [Enable LVDS].
► South Bridge
UHCI #1 (Ports 0 and 1)/ UHCI #2 (Ports 2 and 3)/UHCI #3 (Ports 4 and
5)/UHCI #4 (Ports 6 and 7)
Use this item to control the USB UHCI (USB 1.1) functions. The optional settings
are: [Enabled]; [Disabled].
USB 2.0 (EHCI) Support
Use this item to enable or disable USB 2.0 (EHCI) support. The optional settings
are: [Enabled]; [Disabled].
High Precision Event Timer Configuration:
High Precision Timer
The optional settings are: [Enabled]; [Disabled].
SLP_S4 Assertion Width
Use this item to select a minimum assertion width of the SLP_S4# signal.
Restore AC Power Loss
24
Advertisement
Table of Contents
