Samsung DCS Technical Manual page 131

SAMSUNG DCS
TECHNICAL MANUAL
MMC 500:
DESCRIPTION:
Used to set the values of the system counters. The counters are listed below with a brief description of each.
0. ALARM
REMINDER
1. AUTO REDIAL
2. DISA
INTERCOM
CALL
3. DISA LOCK
OUT
4. NEW CALL
5. UCD AUDIO
ALARM
6. UCD VISUAL
ALARM
COUNTER
7. UCD CS LEVEL
1
8. UCD CS LEVEL
2
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 500
Display shows
2. Enter number from above list (eg., 6)
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
Page 131 of 287 Updated I&M
This is the number of times an alarm reminder will ring a station before cancelling.
RANGE = 1-99.
This is the number of times the system will redial an outside number after the auto
redial feature has been activated. RANGE = 1-15.
This counter sets the maximum number of intercom calls that can be made after
accessing a DISA line. RANGE = 1-99.
This is the number of attempts the system will allow to incorrectly access a DISA
line before locking out the DISA line. RANGE = 1-99.
This is the number of times the system will allow a user to signal New Call on a CO
line during one call. RANGE = 1-99.
This counter controls the Audio UCD Alarm. If the number of calls in the UCD group
reaches the counter value, the alarm operates. RANGE 0-25.
This is the counter that provides a visual alarm when the number of calls waiting to
be answered in the UCD group reaches the counter value. RANGE = 0-25.
.
DCS 70, DCS 24 and DCS Version 6
Provides call wait indication level 1 if number of calls waiting to be answered in UCD
group reaches this value. Range = 0 – 25.
Provides call wait indication level 2 if number of calls waiting to be answered in UCD
group reaches this value. Range = 0 – 25.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
OR
System-Wide Counters
DISPLAY
ALARM REM. CNTER
05 →
UCDS VISUAL ALAM
00 → _
PROGRAMMING
SECTION
May 2002