NETGEAR Nighthawk X4S User Manual page 57

Network Settings
The router comes ready for WiFi, Ethernet, and USB connections. You can customize the router's network settings. We
recommend that you install the router and connect it to the Internet before you change its network settings.
This chapter includes the following sections:
• View or Change WAN Settings
• Set Up a Default DMZ Server
• Change the Router's Device Name
• Change the LAN TCP/IP Settings
• Specify the IP Addresses That the Router Assigns
• Disable the DHCP Server Feature in the Router
• Manage Reserved LAN IP Addresses
• Use the WPS Wizard for WiFi Connections
• Specify Basic WiFi Settings
• Change the WiFi Password or Security Level
• Set Up a WiFi Schedule
• Enable or Disable WiFi 160 MHz
• Enable a WiFi Video Network
• Set Up a Guest WiFi Network
• Enable a WiFi Video Network
• Control the WiFi Radios
• Set Up a WiFi Schedule
• Specify WPS Settings
• Use the Router as a WiFi Access Point
• Use the Router in Bridge Mode
• Set Up a Bridge for a Port Group or VLAN Tag Group
on page 58
on page 59
on page 60
on page 60
on page 64
on page 66
on page 67
on page 71
on page 77
on page 72
on page 72
on page 73
on page 72
on page 76
on page 77
on page 78
on page 79
on page 80
on page 62
on page 64
on page 82
57
5