Panasonic DMP-UB900 Operating Instructions Manual page 32

Language
∫ Soundtrack Preference
Choose the language for audio.
≥ If "Original" is selected, the original language of
each disc will be selected.
≥ When the selected language is not recorded on
the disc, or depending on how the navigation is
created on the disc, it may playback in a
different language than the selected language.
≥ Enter a code ( 42) when you select "Other
¢¢¢¢".
∫ Subtitle Preference
Choose the language for the subtitle.
≥ When "Automatic" is selected, a subtitle for the
language selected in the "Soundtrack
Preference" is displayed only when the
language other than the language selected in
the "Soundtrack Preference" is played back.
≥ When the selected language is not recorded on
the disc, or depending on how the navigation is
created on the disc, it may playback in a
different language than the selected language.
≥ Enter a code ( 42) when you select "Other
¢¢¢¢".
∫ Menu Preference
Choose the language for the disc menus.
≥ Enter a code ( 42) when you select "Other
¢¢¢¢".
∫ Subtitle Text
Select a desired item according to the language
used for MKV subtitles text.
≥ This item is displayed only after playing back a
file.
∫ On-Screen Language
Choose the language for menus and on-screen
messages.
32
SQT1293
Network
∫ Easy Network Setting (
∫ Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
LAN Connection Mode
Select the LAN connection method.
≥ When not using wireless LAN (when turning it
off), select "Wired".
Wireless Settings
This allows the wireless router and connection
settings to be set up. Current connection
settings and connection state can be checked.
The wireless router connection wizard will be
displayed.
Select a connection method to wireless access
point.
Search for wireless network
WPS (PUSH button)
WPS (PIN code)
Manual setting
IP Address / DNS Settings
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
Press [OK] to show the respective setting.
Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
Press [OK] to show the respective setting.
17)