Setup Menu - Panasonic DMP-UB900 Operating Instructions Manual

Setup menu

Reference
Change the unit's settings if necessary. The
settings remain intact even if you switch the unit
to standby.
Some items are common to the Option menu. You
can get the same effect with both menus.
1
Press [HOME].
2
Select "Setup".
3
Select "Player Settings".
Player Settings
Video Format
HDMI
4K(50p/60p) Output
Picture
24p Output
HDMI(VIDEO) Output Mode
Sound
HDMI(AUDIO) Output Mode
3D
Advanced Settings
Language
Network
Ratings
System
OK
RETURN
4
Select an item and change the settings.
To exit the screen
Press [HOME].
HDMI
∫ Video Format
The items supported by the connected devices
are indicated on the screen as "¢". When any
item without "¢" is selected, the images may be
distorted.
≥ If "Automatic" is selected, the best suited output
resolution to the connected TV is automatically
selected.
≥ To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly to
1080p compatible HDTV (High Definition TV). If
this unit is connected to an HDTV through other
equipment, the other equipment must also be
1080p compatible.
∫ 4K(50p/60p) Output
This unit automatically chooses to output images
in 4K*
1
60p) compatible TV.
≥ This item is available only when "Video Format"
is set to "Automatic" and "4K".
≥ This item is not available when "HDMI(AUDIO)
Output Mode" is set to "Video+Audio".
≥ To connect to a TV that supports 4K (50p/60p)
4:4:4/8bit or 4K (50p/60p) 4:2:2/12bit, select
"4K(50p/60p) 4:4:4".
Images will not be output correctly with an
HDMI cable that does not support 18 Gbps.
(The supplied HDMI cable supports 18 Gbps.)
≥ To connect to a TV that supports 4K (50p/60p)
4:2:0/8bit, select "4K(50p/60p) 4:2:0".
Automatic
Off
Automatic
∫ 24p Output
Automatic
Audio Only
Movies and other material recorded at 24p*
output at 24p.
≥ When this unit is connected to TV compatible
with 4K/24p and "Video Format" is set to
"Automatic", images will be output in 4K/24p.
≥ When this unit is connected to a TV compatible
with 1080/24p and "Video Format" is set to
"Automatic", "1080i" or "1080p", images will be
output in 1080/24p.
≥ When BD-Video images other than 24p are
played, images are output at 60p.
≥ If images output in 24p are distorted, change
the setting to "Off".
∫ HDMI(VIDEO) Output Mode
Set whether or not to output audio from the HDMI
VIDEO OUT terminal.
≥ When an amplifier is connected to the HDMI
AUDIO OUT terminal and this menu item is set
to "Automatic ( Video Only / Video+Audio )", the
TV may not output audio. In that case, select
"Video+Audio".
∫ HDMI(AUDIO) Output Mode
Set whether or not to output images from the
HDMI AUDIO OUT terminal.
≥ When this is set to "Video+Audio":
When a device that does not support 3D or 4K
content connected to the HDMI AUDIO OUT
terminal and a device connected to the HDMI
VIDEO OUT terminal are both turned on, 3D or
4K images cannot be output from the latter
device.
(50p/60p) when connected to a 4K (50p or
2 are
29
SQT1293