Panasonic DMP-UB900 Operating Instructions Manual page 12

Enjoying audio with an amplifier connected to the DIGITAL AUDIO OUT/Analogue AUDIO OUT
terminals
Setting
Set the following items in the setup menu (
≥ Set "HDMI(VIDEO) Output Mode" to "Automatic ( Video Only / Video+Audio )". (
≥ Set "HDMI(AUDIO) Output Mode" to "Audio Only". (
≥ To enjoy audio with an amplifier connected to the OPTICAL/COAXIAL terminal or 2ch AUDIO OUT
terminals:
Set "Audio Output" to "Off" in "Advanced Settings". (
To enjoy audio with an amplifier connected to the 7.1ch AUDIO OUT teminals:
Set "Analogue Multi Channel" to "On". (
OPTICAL/COAXIAL (DIGITAL AUDIO OUT)
2ch AUDIO OUT (Analogue AUDIO OUT)
Connect terminals of the same colour.
7.1ch AUDIO OUT (Analogue AUDIO OUT)
Set the speaker presence and size according to your environment. (
(Audio is not output from HDMI OUT terminal.)
Cable connections
A Front speaker (L/R)
B Surround speaker (L/R)
C Centre speaker
12
SQT1293
29):
29)
30)
31)
Coaxial cable
OR
Optical digital cable
Audio cable
Connect Audio
cables to terminals
corresponding to
the speakers you
have connected.
D Subwoofer
E Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
29)
COAXIAL IN
OPTICAL IN
Amplifier/receiver
L
AUDIO IN
R
Amplifier/receiver
31)