Icons In The Tree Display Area - Panasonic WJ-ND200 Operating Instructions Manual

Icons in the Tree Display Area

Type Icon (Name)
(WJ-ND300 (A)/
WJ-ND200)
Recorder
(WJ-ND300 (A))
(Camera in normal
status)
(Not applicable)
(Host name)
Camera
(Not detected)
(Incorrect settings)
(33rd or later)
(Settings changed)
Indicates the network disk recorder WJ-ND300(A)/WJ-ND200. (Normal
display)
This icon will be displayed when number of the detected cameras that are
connected to WJ-ND300 (A) is 33 or more.
Indicates a camera whose network information is not registered in the
WJ-ND300 (A).
It is necessary to configure the network settings and register them in the
(New)
WJ-ND300 (A).
Indicates a camera whose network settings are edited with this software.
To apply the edited settings to the WJ-ND300 (A)/camera, it is necessary
to register this camera again.
(Edited)
Indicates that the network information of this camera is conformed to the
information registered in the WJ-ND300 (A) and the camera. (Camera in
normal status)
Indicates that this camera is not applicable with this software to configure
the network settings even though the network information of this camera
is registered in the WJ-ND300 (A). (Including cameras of other manufac-
turers) Network setting configuration is unavailable with this software.
Indicates the camera whose host name is registered in the WJ-ND300
(A), instead of IP address.
Network setting configuration is unavailable with this software. Moving
and copying the icon of this camera is also unavailable.
Indicates a camera not detected even though its network information is
registered in the WJ-ND300 (A).
For enhancing security, some cameras may not respond (not be detect-
ed) even though whose status is normal.
Indicates that the network information of this camera is not conformed to
the information registered in the WJ-ND300 (A) and the camera (IP
address, etc.) even though the camera is normally detected. This icon will
be displayed when there is no available IP address for this camera or
when failed to automatically assign an IP address to this camera.
Indicates the 33rd detected camera or later.
The settings for this camera will not be applied since the WJ-ND300 (A)
can register up to 32 cameras.
Indicates that the camera number of this camera has been changed since
this camera is deleted or moved.
It is necessary to register this camera in the WJ-ND300 (A) again. When
this camera is registered in the WJ-ND300 (A) again, it is necessary to
configure the settings since the settings such as the recording rate will
return to the default settings.
Description
9