Multimedia Pocket
Inserting the device
4
Remove the device by holding both sides of the device.
CAUTION
Handle the device as shown (holding both sides). Otherwise, the device may be
damaged. Also, do not apply excessive downward force on the device. The
projections at the bottom of a device become deformed.
1
Gently insert the device into the multimedia pocket by pushing on
both corners until it is firmly in place.
2
Close the cover (B) until it clicks into place.
3
Close the cover (C) until the protuberance (D) matches up with the
mark (E).
CAUTION
Insert the device with the plastic side (A) on top.
56