Editing An Arpeggio - Casio MZ-X500 User Manual

Editing an Arpeggio

Editing an Arpeggio
You can edit a Digital Keyboard built-in arpeggio to
create an original arpeggio of your own.
There are two arpeggio types: step type and variation
type. Editable parameters depend on the type of
arpeggio type you are using. To determine the type of
an arpeggio you have selected, refer to the separate
"Appendix".
■ Step Type Arpeggio
With a step type arpeggio, you can edit its steps and its
parameters. A step type arpeggio can contain up to 16
steps. See the table in step 7 of the procedure below for
information about settings that can be configured.
■ Variation Type Arpeggio
With a variation type arpeggio, you can edit only its
parameters.
EN-42
To edit each step
• This editing operation can be performed on a step
type arpeggio only.
1.
On the MENU screen, touch
"ARPEGGIATOR".
2.
Touch the arpeggio name.
Arpeggio name
3.
Touch the arpeggio you want to edit.
4.
Touch bo EXIT.
This returns to the ARPEGGIATOR screen.
5.
Touch "Edit".
This displays the ARPEGGIATOR EDIT screen.
6.
Touch "Step Edit".