Casio MZ-X500 User Manual page 25

Editing a Tone (User Tones)
DSP type/Parameter
Pitch Shifter
Pitch (X)
High Damp
Feedback
Input Level
Wet Level (Y)
Dry Level
Fine
Multi Chorus
LFO Rate (X)
LFO Depth (Y)
Wet Level
Dry Level
Ring Modulator
OSC frequency (X)
LFO Rate
LFO Depth (Y)
Tone
Wet Level
Dry Level
Delay
Delay Time (X)
Delay Ratio L
Delay Ratio R
Delay Level L
Delay Level R
Feedback Type
Feedback (Y)
High Damp
Delay Tempo Sync
Input Level
Dry Level
Wet Level
EN-24
This effect transforms the pitch of the input signal.
Adjusts the pitch shift amount in quarter tone steps.
Adjusts the high-range damp. A smaller number increases
damping.
Adjusts the feedback amount.
Adjusts the input level.
Adjusts the level of the effect sound.
Adjusts the level of the direct sound.
Adjusts the pitch shift amount. –50 is a quarter note decrease,
while +50 is a quarter note increase.
This is a chorus effect with six different LFO phases.
Adjusts the LFO rate.
Adjusts the LFO depth.
Adjusts the level of the effect sound.
Adjusts the level of the direct sound.
Multiplies the input signal with an internal oscillator signal to
create a metallic sound.
Sets the reference frequency of the internal oscillator.
Adjusts the LFO rate.
Adjusts the LFO depth.
Adjusts the timbre of the ring modulator input sound.
Adjusts the level of the effect sound.
Adjusts the level of the direct sound.
Delays the input signal and feeds it back to create a repeating
effect.
Adjusts the total delay time.
Adjusts the ratio of the left channel relative to the total delay
time.
Adjusts the ratio of the right channel relative to the total delay
time.
Adjusts the level of the left channel.
Adjusts the level of the right channel.
Selects the feedback type.
Stereo: Stereo feedback
Cross: Cross feedback
Adjusts the feedback amount.
Adjusts the high-range damp. A smaller number increases
damping.
Specifies how the actual total delay time is synced with tempo.
• Off: Uses Delay Time value.
• 1/4 to 3/4: Uses value in accordance with number of beats.
Adjusts the input level.
Adjusts the level of the direct sound.
Adjusts the level of the effect sound.
Description Settings
–24 to 0 to +24
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
–50 to 0 to +50
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
Stereo, Cross
0 to 127
0 to 127
Off, 1/4, 1/3, 3/8, 1/2, 2/3,
3/4
0 to 127
0 to 127
0 to 127