Display Assembly Sub Components - HP 340 G3 Maintenance And Service Manual

Display assembly sub components

If you only need to remove the display bezel, webcam module, microphone module, or raw display panel, you
do not need to remove the entire display assembly from the computer. This section describes removing these
display assembly subcomponents that can be removed with the display connected to the computer.
Description
Raw display panel (35.6-cm [14.0-in])
HD, SVA display
FHD, UWVA display
Display bezel
For use in HP 340 G3 Notebook models with a webcam
For use in HP 340 G3 Notebook models without a webcam
For use in HP 346 G3 Notebook models with a webcam
For use in HP 346 G3 Notebook models without a webcam
For use in HP 348 G3 Notebook models with a webcam
For use in HP 348 G3 Notebook models without a webcam
Webcam module
VDW
VDS
Microphone module
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
To remove display assembly components:
If it is necessary to replace any of the display assembly subcomponents:
1. To remove the display bezel with the display connected to the computer:
a. Remove the two screw covers (1) and two Phillips PM2.5×4.0 screws (2) that secure the display
bezel to the enclosure.
30 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Spare part number
845192-001
845194-001
845186-001
854119-001
845187-001
850900-001
845188-001
854120-001
845207-001
845208-001
852310-001