Panasonic WV-SFV631L Important Information Manual page 20

About the indicator
The indicator will light or blink as follows depending on the camera status.
Indicator type and operation state
ACT indicator
When data is being sent via the network camera
LINK indicator
When the camera is able to communicate with the con-
nected device
SD MOUNT indicator
• When an SD memory card is inserted and could be
recognized
• When data can be saved after the SD memory card is
inserted and the SD ON/OFF button is pressed
• When data can be saved to the SD memory card
• When the SD memory card is removed after holding
down the SD ON/OFF button for about 2 seconds
• When data cannot be saved to the SD memory card
because an abnormality was detected or the SD
memory card is configured not to be used
SD ERROR/AF indicator
• When AF (Auto Focus) operation is being executed
• When the set is being started
• When an SD memory card is recognized normally
• When an abnormality is detected in both SD1 and SD2
cards after the camera has started
• When an abnormality is only detected in the SD1 card
after the camera has started
• When an abnormality is only detected in the SD2 card
after the camera has started
20
Change of indicator indication
Blinks green (accessing)
Lights orange
Lights off  Blinks green 
Lights off
Lights off Lights green
Lights green
Lights green  Blinks green 
Lights off
Lights off
Blinks red (Interval of 1 time/ second)
Lights red
Lights red  Lights off
Lights red
Lights red  Blinks red
(Interval of 1 time/ 3 seconds)
Lights red  Blinks red
(Interval of 2 times/ 3 seconds)