11
FEATURES
MODELS :
WOG112LCTA, WOG140LCTA
HIGH PERFORMANCE
z
Powerful heating
High power models realize high leaving water temperature and high heating capacity even at
low ambient temperature by newly developed "Linear Control Injection Technology".
It is possible to provide high water temperature and warm rooms immediately in cold region
during winter.
High leaving water temperature
High leaving water temperature 60°C kept down to -20°C outdoor temperature without using
backup heater.
High heating capacity
FUJITSU GENERAL's advanced
Linear Control Injection Technology
Injection port
Twin Rotary Compressor
with Linear Control Injection port
- (OU01 - 01) -
It realizes the high condensing temperature
Heating cycle
without overheating discharge gas
temperature by Linear Control Injection
process during compression.
Therefore, the condensing temperature
rises up higher than normal circuit.
Water
A higher hot water temperature is realized
Heat
by controling the injection amount
exchanger
according to the usage state.
Indoor unit
Linear Control
Injection
Evaporator
Linear Control
Injection
Outdoor unit
Outdoor unit / Single phase
High compression
Normal
refrigerant
circuit