Siemens gigaset SE551 User Manual page 29

Gigaset SE551 WLAN dsl/cable / multilanguage / A31008-M1029-R101-2-Z143 / qig_Gigaset551.fm / 03.07.2006
Windows 2000
ì
Click on Start – Settings – Control Panel.
ì
Double click on the Network and dial-up connections icon and then on the
LAN connection icon.
ì
In the General tab, click on the Properties button.
ì
In the LAN connection properties window, select the TCP/IP option for your net-
work card or adapter. Make sure you select the right TCP/IP entry if there are several
in the selection list.
ì
Click on the Properties button.
ì
In the General tab, activate the Obtain IP address automatically and Obtain DNS
server address automatically options.
ì
Click on OK or Close to close each window.
ì
Restart your network:
– Restart your Gigaset SE551 WLAN dsl/cable by unplugging the power lead and
plugging it in again.
– Check that the power LED on the front panel of the router is constantly on.
– Reboot your PC.
Windows 98 SE /ME
ì
Click on Start – Settings – Control Panel.
ì
Double-click on the Network icon.
ì
In the Network window on the Configuration tab, select the TCP/IP option for your
network card or adapter. Make sure you select the right TCP/IP entry if there are sev-
eral in the selection list.
ì
Click on Properties.
ì
Click on the IP address tab and select the option Obtain IP address automatically.
ì
Click on the Gateway tab and remove any entries in the Installed gateways list.
ì
Click on OK twice to close the Network window.
ì
Restart your network:
– Restart your Gigaset SE551 WLAN dsl/cable by unplugging the power lead and
plugging it in again.
– Check that the Power LED on the front panel of the router is constantly on.
– Reboot your PC.
You have now configured and opened a link between your PC and the Gigaset SE551
WLAN dsl/cable.
Quick Start Guide
25