Pioneer DJM-700-K Service Manual page 34

1
A
2) Set the command options after setting the parameter file.
(You only need to set the command options the first time you start the program *1)
*1 Command option settings are cleared when you change the parameter file, making it necessary to reconfigure the settings.
Setup procedure:
Display the "Device Setup" screen by selecting "Setup" from the "Device" menu.
B
Under the "Advanced" tab, check the following check boxes under "Command options" on the "Device Setup" screen.
C
D
Click "OK" to finish the setup.
Items to check
Blank check before erase
Read verify after Program
Checksum after Program
E
F
34
1
2
Description of the command option
Checks if the chip is blank before erasure
(decides erasure is unnecessary if the area is blank.)
Automatically verifies newly downloaded firmware.
Automatically performs a checksum on newly downloaded firmware.
DJM-700-S
2
3
3
4
4