Specifications - Makita HP1620 Instruction Manual

ENGLISH
1-1. Switch trigger
1-2. Lock button
2-1. Lamp
3-1. Reversing switch
4-1. Action mode changing lever

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Explanation of general view
5-1. Side grip
6-1. Chuck key
7-1. Sleeve
7-2. Ring
8-1. Depth gauge
Model
Concrete
Steel
Wood
-1
)
Overall length
Net weight
Safety class
equipment and
environmentally compatible
END201-4
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration
determined according to EN60745-2-1:
Work mode: impact drilling into concrete
its
Vibration emission (a
Uncertainty (K) : 2 m/s
Work mode : drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
EC-DECLARATION OF CONFORMITY
ENE039-1
Model; HP1620,HP1620F,HP1621,HP1621F
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
ENF002-1
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
000230
Responsible Manufacturer:
3
8-2. Side grip
8-3. Grip base
9-1. Blow-out bulb
HP1620/HP1620F/HP1621/HP1621F
16 mm
13 mm
30 mm
0 - 2,800
0 - 44,800
303 mm
1.7 kg
/II
) : 95 dB(A)
pA
) : 106 dB(A)
WA
Wear ear protection
total value (tri-axial
) : 22 m/s
h,ID
2
) : 3 m/s
h,D
2
CE2007
Tomoyasu Kato
Director
ENG102-1
ENG203-1
vector sum)
2
ENG301-1
2
ENH101-8