Table of Contents
Advertisement
Other Features and Functions
Other Features and Functions
Pager Call
The Pager Call button is located on the charger base and is
used to locate the Wanderer handset.
1. Press [PAGER CALL] on the charger base. The base sends a
stutter tone burst to the handset for 30 seconds, and the
LCD on the handset indicates Paging Call. Repeat as
necessary until your Wanderer is located.
2. Press [ON/OFF] on the handset to stop the ringing.
C O N D I T I O N S
»
When Pager Call button is activated, the Call LED pulses.
Redialing
To redial an outside call:
1. Press [ON/OFF].
2. Press [SPEED] + [#].
For added security, only the [#] sign appears on the LCD display.
Ringing Signal
The audible ring signal on the Wanderer can identify the type of
incoming call as internal or external.
Internal Ring Signal ... a single ring is repeated.
External Ring Signal ... a double ring is repeated.
C O N D I T I O N S
»
The telephone associated with the Wanderer may ring
once or twice before the Wanderer rings.
»
A screened transfer call rings as an internal call until the
supervising party hangs up, then it changes to an
external signal.
Using Your New Wanderer
13
Advertisement
Table of Contents
