Step 2 : Setting Up The Remote Commander - Sony SLV-EZ715AS Operating Instructions Manual

Step 2
Setting up the remote commander
Inserting the batteries
Insert two R6 (size AA) batteries by
matching the + and – on the
batteries to the diagram inside the
battery compartment.
Insert the negative (–) end first,
then push in and down until the
positive (+) end clicks into position.
Using the remote commander
You can use this remote
commander to operate this
VCR and a Sony TV. Buttons
on the remote commander
marked with a dot (•) can be
used to operate your Sony TV.
If the TV does not have the g
symbol near the remote sensor,
this remote commander will
not operate the TV.
To operate
the VCR
a Sony TV
Notes
• The TV/VIDEO button selects the TV's input source (either aerial in or line in). The
button does not control this VCR.
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
01GB03GET-715AS/NZ.p65
Set TV/VIDEO to
VIDEO
and point at the remote sensor on the VCR
and point at the remote sensor on the TV
TV
5
SLV-EZ715AS/NZ_GB
Remote sensor
TV/VIDEO
Getting Started
10/1/01, 11:58
3-065-579-11 (2)
5