Fujitsu PRIMEQUEST 2000 Series Configuration Manual page 42

Note
If, in the shell screen, you cannot see the device you expect, the configuration of SAN or FCoE storage
or FCoE switch, or the physical connection(cable, etc.), may not be correct. Check these points again.
Imｐｏｒｔａｎｔ
Note about the connection to the storage device
Depending on storage device, there is a case that the settings of parameters of CNA driver are required.
For more information on the storage device, refer to the manual of the storage device.
For more information on the settings of connection to ETERNUS, refer to the manual of ETERNUS.
Copyright 2016 FUJITSU LIMITED 42 CA92344-0966-01