Installing Multiple Transmitters; Testing Transmitters; Erasing Transmitters; Recording Reminder Messages - Linear Personal Emergency Reporting System PERS-3600B Installation & Operating Instructions Manual

9. INSTALLING MULTIPLE TRANSMITTERS

ADDS MULTIPLE TRANSMITTERS
1 PRESS TEST BUTTON
• CONSOLE ANNOUNCES
TEST MODE
2
PRESS TEST BUTTON AGAIN
• CONSOLE ANNOUNCES ITS
READY TO LEARN TRANSMITTERS
NOTE: EACH TIME THE TEST BUTTON IS PRESSED IN THE ADD
TRANSMITTER MODE, THE CONSOLE WILL BE READY TO INSTALL A
TRANSMITTER IN THE NEXT AVAILABLE SENSOR ZONE LOCATION.
THE CONSOLE WILL ANNOUNCE THE SENSOR ZONE LOCATION NUMBER.
3 ACTIVATE TRANSMITTER
• CONSOLE ANNOUNCES
THE TRANSMITTER TYPE
NOTE: IF THE CONSOLE'S MEMORY
IS FULL, THE CONSOLE WILL ANNOUNCE
"ERROR ZONES FULL"
REPEAT STEPS 2 & 3 FOR
4
ADDITIONAL TRANSMITTERS
(UP TO 16 TOTAL)
5 PRESS CANCEL TO RETURN TO STANDBY MODE
• THE CONSOLE WILL ANNOUNCE ITS STATUS
THE CONSOLE WILL RETURN TO STANDBY MODE
AUTOMATICALLY AFTER 3 MINUTES
NOTE: WRITE DOWN EACH TRANSMITTER'S TYPE AND ZONE NUMBER
WHEN THE TRANSMITTER IS ADDED. THE CENTRAL STATION WILL NEED
TO KNOW THE TYPE AND REPORTING ZONE FOR EACH TRANSMITTER

11. ERASING TRANSMITTERS

CAUTION: ALL TRANSMITTERS
WILL BE ERASED!
1 PRESS AND HOLD THE TEST BUTTON FOR 5 SECONDS
• CONSOLE ANNOUNCES "ZONE RESET"
(ALL TRANSMITTERS ERASED)
2
PRESS CANCEL TO RETURN TO STANDBY MODE
• THE CONSOLE WILL ANNOUNCE ITS STATUS
THE CONSOLE WILL RETURN TO STANDBY MODE
AUTOMATICALLY AFTER 3 MINUTES

10. TESTING TRANSMITTERS

1
2
3
DXS-62A
4

12. RECORDING REMINDER MESSAGES

RECORDING REMINDER MESSAGES
1. PRESS AND RELEASE THE TEST BUTTON
2. PRESS AND HOLD THE HOME BUTTON FOR
3. RECORD UP TO A 15 SECOND MESSAGE
4. PRESS THE HOME BUTTON TO STOP RECORDING
5. PRESS THE HOME BUTTON AGAIN TO PLAY THE
6. REPEAT STEPS 2-5 FOR ADDITIONAL MESSAGES
7. PRESS AND RELEASE THE CANCEL BUTTON TO
TEST PLAYING REMINDER MESSAGES
1. PRESS AND RELEASE THE TEST BUTTON
2. PRESS AND RELEASE THE HOME BUTTON
3. THE CONSOLE WILL ANNOUNCE EACH MESSAGE
4. PRESS THE HOME BUTTON TO ADVANCE TO
5. PRESS AND RELEASE THE CANCEL BUTTON TO
NOTE: TIME SCHEDULING FOR PLAYING REMINDER
MESSAGES IS SET WITH THE RA-2400 SOFTWARE
ERASING ALL REMINDER MESSAGES
1. PRESS AND RELEASE THE TEST BUTTON
2. PRESS AND HOLD THE HOME BUTTON FOR
3. THE CONSOLE WILL ERASE ALL REMINDER MESSAGES
4. PRESS AND RELEASE THE CANCEL BUTTON TO
PRESS TEST BUTTON
• CONSOLE ANNOUNCES
TEST MODE
ACTIVATE EACH OF THE
CONSOLE'S TRANSMITTERS,
ONE AT A TIME
THE CONSOLE WILL ANNOUNCE
THE TRANSMITTER'S TYPE
AND ZONE NUMBER AND ANY
SUPERVISORY CONDITIONS
FOR THE TRANSMITTER
PRESS CANCEL TO RETURN TO STANDBY MODE
• THE CONSOLE WILL ANNOUNCE ITS STATUS
THE CONSOLE WILL RETURN TO STANDBY MODE
AUTOMATICALLY AFTER 3 MINUTES
TO ENTER TEST MODE
5 SECONDS (BE READY TO RECORD)
(SPEAK AT NORMAL VOLUME, TWO FEET FROM CONSOLE)
MESSAGE JUST RECORDED, PRESS THE HOME
BUTTON TWICE AND HOLD IT AFTER THE 2ND PRESS
TO RECORD ANOTHER MESSAGE IN THE NEXT
AVAILABLE MESSAGE NUMBER
(UP TO 8 MESSAGES ALLOWED)
EXIT TEST MODE
TO ENTER TEST MODE
NUMBER, THEN PLAY THE RECORDED MESSAGE
THE NEXT MESSAGE TO BE PLAYED
EXIT TEST MODE
TO ENTER TEST MODE
MORE THAN 10 SECONDS
AND PLAYBACK SCHEDULES
EXIT TEST MODE
3