Panels - Teac iTB400 i-TALLBOY User Manual

BASIC OPERATION
PREPARATION
1) Before the unit is turned on, please check if all the connections are right and safe.
Then connect the main power.
2) Press the POWER ON/OFF button on the back panel to turn on the main power.
3) Press the STANDBY button on the remote control (or front panel) to switch to
operation mode.
STATE INDICATION OF DISPLAY SCREEN
1. In radio mode, the display screen will show the currently tuned frequency and the
mono/stereo status.
2. In Audio-input, iPod status, show the signal input and main volume status.
STANDBY MODE
Press the STANDBY button on the remote control (or on front panel) to switch to
operation or standby mode.
Note: Make sure that the unit is connected to the power source.
SLEEP BUTTON
In play status, press the SLEEP button on the remote control continuously, you can set
the different sleep time for this unit: 10 min, 20 min, 30 min, 60 min, 90 min, 120 min.
For example, if you press the SLEEP button to select ``10 min``, the unit will enter
sleep mode in 10 minutes.
MUTE BUTTON
If you press the MUTE button while playing, sound output will be switched off. Press
the MUTE button again or the VOL+/- buttons to resume the previous volume level.
Note: When in the Mute mode, the characters on display screen will flash.
FAST FORWARD AND FAST REWIND
In play status, press the or
button again or PLAY button to resume playing mode.
Note: These buttons are unavailable in Audio Input mode.
PREVIOUS AND NEXT
In play status, press the button to go to the previous audio file; press the
button to go to the next audio file.
Note: These buttons are unavailable in Audio Input mode.
VOLUME SETTING
Press the VOL.+/- buttons to turn the volume up or down.
button to fast rewind or fast forward. Press the
8

PANELS

4 5
1
2
9
3
10
6 7
11 12
13 14
1. FAST REWIND/FAST FORWARD
BUTTONS
8
2. AUDIO INPUT BUTTON
3. SLEEP BUTTON
4. IPOD INTERFACE
5. STANDBY BUTTON
6. PLAY/PAUSE BUTTON
7. STOP BUTTON
8. PREVIOUS/NEXT BUTTONS
9. VOLUME -/+ BUTTONS
10. DISPLAY SCREEN
11. USB SLOT
12. MEMORY CARD SLOT
13. POWER SUPPLY INPUT
14. POWER ON/OFF
5