Advertisement
WARNING
Please read and understand all the following warnings and those marked on the unit.
This unit has been designed and manufactured to assure personal safety.
Connect only to appropriate main
power as indicated on the unit or
User Manual.
Avoid direct sunshine and
heat source.
Protect power cable: avoid stress
and keep out of walk ways; do not
pull & bend excessively.
Keep the unit and power plug
away from water.
Never open the cover, avoid
dropping metal objects into the unit,
such as needle, hairpin, coin etc.
Unplug the set from the outlet
when you do not use it for a long
time.
2
RADIO OPERATION
1. Enter FM Function
While in operating mode, press the
FM
mode.
2. Select Bands
1) Directly input frequency: press the
frequency that you want. The range of FM frequency is from 88.00MHz to 108.00
MHz.
2) Select the band by pressing
TU-
or
frequency up or down a step. The step of FM is 0.05 MHz.
3) Select saved stations by pressing number buttons. For example: press
twice,
5
button once, you may select the 25th saved station. Press the
button to switch to the previous or next band.
4) Automatically search bands: press the
search bands from low to high frequency automatically. The searched band are
saved automatically. Press this button again to stop searching.
3. Save Bands
Press the
SAVE
button to save the current frequency. For example: if you want to
save 99.3 MHz in 28th memory cell, press
T/F
button to input 9 9 3, then press
Note: ``
`` (on the unit`s display screen) means Saving band.
4. Soundtrack Selection
To select Mono or Stereo while in FM mode, press
stereo, the display shows a stereo signal. If the signal is not strong enough, you
cannot select Stereo.
Note: ``
`` (on the unit`s display screen) means Stereo.
5. Exit FM Mode
1) Press the
USB/SD
button on the remote control to exit FM status, and switch to
USB/CARD mode.
2) Press the
IPOD
button on the remote control to exit FM status, and switch to the
IPOD mode.
3) Press the
AUDIO
button on the remote control to exit FM status, and switch to
Audio input mode.
(Please vary the antenna direction to find the strongest signal for each station.)
button on the remote control to enter FM
T/F
button on the remote control, then input the
TU+
button: press this button to adjust the
10+
CH-
SEARCH
button, this system starts to
10+
button twice and
8
button once, press
SAVE
button.
MO/ST
button. When you select
11
button
or
CH+
Hide quick links:
Advertisement
