Advertisement
BASIC OPERATION
USB/DIGITAL CARD
It is possible to listen to audio files using the USB or CARD interface of this unit.
1. Connect the USB device or CARD with this unit.
2. Press the
USB/SD
button on the remote control to play the USB or CARD. Press
USB/SD
button again to switch between USB and CARD modes.
3. Press the
or
button to fast rewind or fast forward; Press the
button to go to the previous or next audio files.
4. To exit the USB/CARD mode: Press the
to other modes.
Note:
1) USB-Extension cable should have a max. length of 0.5m.
2) Depending on the amount of data and media speed, it may take longer for system
to read the contents of media device. In some cases, reading time may be as long
as 60 seconds. This is not a malfunction.
3) Even when they are in a supported format, some files may not play depending on
the content.
IPOD AUDIO
,
or
FM
button, and switch
10
ACCESSORIES
60GB
or
MINI
Part 1: Plastic Adaptors for iPod Docking
Part 3: Remote Control
INSTALL THE REMOTE CONTROL BATTERY
1
2
30GB
NANO
Part 2: Audio Cable
Part 4: Base Copper Feet
Part 5: User Manual
1. Reverse the remote control and press the ridged
area to the right, then pull the cover out at the same
time.
2. Insert a CR2025 lithium battery into the battery
compartment. Make sure the symbol + faces up.
3. Replace the battery cover.
Note:
1) If the remote control can only work within
short distance, please change a new battery.
2) Never try to recharge batteries, short-circuit,
damage or bury.
3) If you won`t use the remote control for a long
time, please remove the battery.
3
USE R MAN UAL
Hide quick links:
Advertisement
