Nikon N4004s Instruction Manual page 14

••••••••••••••••••••••••••••••••••••••••••••••••••••
: Flash shooting with built·in TTL flash :
•
•
• •
• •
• •
•
• •
•
•
1. Push flash lock release
buttons to release built-in flash.
3. Wait a few seconds for ready-
light to come on , then shoot.
2. Lightly press shutter release
button to turn on the N4004s.
Check to make sure subject is
within proper flash shooting range
for film speed in use. If subject is
beyond flash shooting range,
ready-lig ht LED blinks for approx.
3 sec. after releasing the shutter.
For details, see page 40.
••••••••••••••••••••••••••••••••••••••••••••••••••
14
•
•
• •
•
•
•
Fully depress shutter release button
to take picture. This automatically
advances film by one frame .
••••••••••••••••••••••••
• •
•
•
• •
•
•
•
• Upon shutter release, the expo-
sure indicator LED(s) turns off
approx. 2 sec. after you remove
your finger from the button .
-I f
camera detects abnormality
during fi lm advance (when film
is loaded), the self-timer indi-
cator LED lights up for a few
seconds. If this happens, set
the shutter speed dial to L
(lock), then proceed as usual.
•
•••••••••••••••••••••••
• •
•
•
•
• •
-
-
•