Nikon CP4200 Owner's Manual page 135

Projection parts
For more information on using EH-62A AC adapter kit, see EH-62A AC adapt-
er kit manual.
Disconnecting the AC Adapter Kit
Before disconnecting the AC adapter kit, turn the camera off and remove the wall plug
from the power outlet. Open the battery-chamber cover and push upward the battery
latch and remove the EP-62A from the camera.
4
Attach the ferrite core provided
with the camera to the EP-62A
power connector cord.
Position the projection parts of the ferrite
core facing away from the camera, and
attach the ferrite core about one cm (0.4")
away from the camera as shown in the fig-
ure ( ).
125