No.ma036)1 - JVC KD-AR300 Service Manual

QQ
3 7 63 1515 0
3.1.7 Removing the CD mechanism assembly
(See Fig. 7)
• Prior to performing the following procedure, remove the front
panel assembly, bottom cover, side panel, rear bracket and
main board.
• Remove the front chassis assembly as required.
(1) Remove the three screws H attaching the CD mechanism
assembly on the top chassis.
(2) Take out the CD mechanism assembly.
3.1.8 Removing the front board
(See Figs.8 to 10)
• Prior to performing the following procedures, remove the front
panel assembly.
(1) Remove the four screws J on the back side of the front pan-
el assembly. (See Fig.8.)
(2) Release the ten joints f and remove the rear cover. (See
TE
L 13942296513
Fig.9.)
(3) Release the joint g and take out the front board from the
front panel assembly. (See Fig.10.)
www
.
1-8 (No.MA036)
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
CD mechanism assembly
Q Q
3 6 7 1 3 1 5
J
Joint f
Joints f
Front board
co
.
9 4 2 8
H
Top chassis
H
Fig.7
J
0 5 8 2 9 9 4 2 8
J
Fig.8
Joints f
Rear cover
Joint f
Joints f
Fig.9
Joint g Front panel assembly
m
Fig.10
9 9
9 9