Denon AVR-1602 Operating Instructions Manual page 16

ENGLISH
7 Set the various surround parameters.
• CINEMA EQ setting
CINEMA EQ OFF
ON OFF
or or
• PANORAMA setting
PANORAMA OFF
ON OFF
or or
• DIMENSION setting
DIMENSION 3
0 3 6
or or
• CENTER WIDTH setting
CENTER WIDTH O
0 4 7
or or
• DEFAULT setting
DEFAULT Y/N
Yes Y/N No
or or
Select "Yes" to reset to the factory defaults.
Stop pressing buttons once you have completed
setting the surround parameters. After several
seconds the normal display reappears and the
settings you have made are automatically set.
16
NOTE:
• When making parameter settings, the display will
return to the regular condition several seconds
after the last button was pressed and the setting
will be completed.
Surround parameters q
II
Pro Logic Mode:
The Cinema mode is the standard required mode
for all A/V systems.
The Music mode is recommended as the standard
mode for autosound music systems (no video),
and is optional for A/V systems.
The Pro Logic mode offers the same robust
surround processing as original Pro Logic in case
the source contents is not of optimum quality.
Select one of the modes ("Cinema", "Music" or
"Pro Logic").
Panorama Mode:
This mode extends the front stereo image to
include the surround speakers for an exciting
"wraparound" effect with side wall imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either
towards the front or towards the rear.
The control can be set in 7 steps from o to 6.
Center Width Control:
This control adjust the center image so it may be
heard only from the center speaker; only from the
left/right speakers as a phontom image; or from all
three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1 Select the input source.
Playback with a digital input
q Select an input source set to digital (COAXIAL/
OPTICAL) (see page 10).
EX:
DVD/VDP
3
(Main unit) (Remote control unit)
w Set the input mode to "AUTO" or "DTS".
8
(Main unit) (Remote control unit)
2
Select the Dolby/DTS Surround mode.
SURROUND
MODE
(Remote control unit)
When performing this operation from the main
unit's panel, press the SURROUND MODE
button, then press the SELECT buttons and
select "DOLBY/DTS".
• The following appears on the display.
(DOLBY PLII, DOLBY PROLOGIC, DOLBY
DIGITAL, DTS)
(Main unit)
3
Play a program source with the ,
• The Dolby Digital indicator
DIGITAL
lights when playing Dolby
Light
Digital sources.
4
Set the surround parameter according to the source.
SURROUND
First, press the SURROUND button.
MENU
NOTE: Please make sure the "AUDIO" position of the slide switch on the remote
(Remote control unit)
control unit.
5
Use the (left) and
(Remote control unit)
CINEMA EQ OFF
SURROUND
MENU
Press the SURROUND or
setting.
(Remote control unit)
1 3
B
1 2 2
CD MD/CDR
AUDIO VIDEO
POWER
AVR/AVC TV VCR DVD/VDP
ON
CD DVD/VDP
OFF 1 2 3
V. AUX VCR TV/DBS
1
4 5 6 7
INPUT MODE CDR / TAPE TUNER SHIFT
1
8 9 0
SURROUND
·
MODE TAPE VCR
2
6 7
CHANNEL
0
3 2 0
VIDEO SELECT CD·MD/CDR·DVD/VDP DISC SKIP+
TITLE
8 3 9
2
6 7
4, 5, 6, 7, 8
SYSTEM SURROUND
SET UP MENU
MASTER
CH SELECT VOL
5, 6, 7, 8
SELECT
T.TONE STATUS MUTING
RETURN DISPLAY
CHANNEL TV VOLUME
B
REMOTE CONTROL UNIT RC-896
mark.
• The DTS indicator lights when
Light
playing DTS sources.
(right) buttons to set the CINEMA EQ.
(Initial)
ON OFF
(left) button (right) button
(down) button to switch to the D. COMP.