Parallel Port Configuration - ECS h61h2-a2 Manual

42
Parallel Port Configuration
Scroll to this item and press <Enter> to view the following screen:
Main

Parallel Port Configuration

Parallel Port
Device Settings
Change Settings
Device Mode
Parallel Port (Enabled)
This item allows you to enable or disable parallel port.
Device Settings (IO=378h; IRQ=5; DMA=3;)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Device Mode (ECP Mode)
This item shows the information of the device mode.
Press <Esc> to return to the Super IO Configuration page.
Press <Esc> to return to the Advanced Menu page.
Advanced Chipset
IO=378h; IRQ=5; DMA=3;
M.I.B III Boot
Enabled
Auto
ECP Mode
Using BIOS
Security Exit
Enabled or Disabled
Parallel Port (LPT/LPTE)

: Select Screen

/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit