Installing Memory Modules - ECS h61h2-a2 Manual

12

Installing Memory Modules

This motherboard accommodates two memory modules. It can support two 240-pin
DDR3 DDR3 1333/1066
DDR3 SDRAM memory module table
You must install at least one module in any of the two slots. Total memory capacity
is 16 GB.
1. To achieve better airflow rates and heat dissipation, we suggest
that you use a high quality fan with 3800 rpm at least. CPU fan and
heatsink installation procedures may vary with the type of CPU fan/
heatsink supplied. The form and size of fan/heatsink may also vary.
2. DO NOT remove the CPU cap from the socket before installing a
CPU.
3. Return Material Authorization (RMA) requests will be accepted
only if the motherboard comes with the cap on the LGA1155 socket.
SDRAM. The total memory capacity is 16 GB.
Memory module
DDR3 1066
DDR3 1333
Do not remove any memory module from its antistatic packaging
until you are ready to install it on the motherboard. Handle the
modules only by their edges. Do not touch the components or metal
parts. Always wear a grounding strap when you handle the modules.
Installing the Motherboard
Memory Bus
533 MHz
667 MHz