Table of Contents
Advertisement
Material No:
111-7500
Description:
MANUAL-OPERATOR SCARIFIER [110H:EN]
HAYTER
General Document
THIS UNPUBLISHED DOCUMENT CONTAINS HAYTER CONFIDENTIAL AND PROPRIETARY INFORMATION. IT MAY NOT BE WHOLLY OR PARTIALLY COPIED,
DISCLOSED TO OTHERS, OR USED FOR ANY PURPOSE WITHOUT WRITTEN PERMISSION FROM HAYTER. IF PUBLICATION OCCURS, THE FOLLOWING
NOTICE APPLIES:
"© HAYTER ALL RIGHTS RESERVED".
RELEASE TO PRODUCTION
Reason for Revision:
C:\Windows\Temp\pdfg-LYNMS313_\e8\4b01-a414ac-48bf16-fc4230-a6575d-6ef62e\111-7500.docPage 1 of 1
Rev:
A
Release/Change Authorization Number :
5092414
Issue Date :
10.06.2014
Supersedes :
Superseded By :
Lorraine
Created By :
Hiles
Scale :
Advertisement
Table of Contents
Related Manuals for Hayter Scarifier 110H
Summary of Contents for Hayter Scarifier 110H
- Page 1 General Document THIS UNPUBLISHED DOCUMENT CONTAINS HAYTER CONFIDENTIAL AND PROPRIETARY INFORMATION. IT MAY NOT BE WHOLLY OR PARTIALLY COPIED, DISCLOSED TO OTHERS, OR USED FOR ANY PURPOSE WITHOUT WRITTEN PERMISSION FROM HAYTER. IF PUBLICATION OCCURS, THE FOLLOWING NOTICE APPLIES: “© HAYTER ALL RIGHTS RESERVED”.
- Page 2 Scarifi er Code 110H Original Version (EN) From Serial Number: 314000001 and up Issued: 10.06.14 Part number: 111-7500 Rev A...
-
Page 3: Table Of Contents
CONTENTS Introduction Slopes Knife Blade Adjustment Main Features Before Scarifying Specifi cations Collector Bag Without Collector Bag Collection Noise and Vibration Information Non Grassed Areas Safety Precautions 5 - 6 Maintenance Schedule Safety Alert Symbol Engine Detail Training Preparation Scarifi er Maintenance 10 - 11 Safety Symbols 5 - 6... -
Page 4: Introduction
The safety precautions listed in this handbook and all other generally recognised regulations on safety must be observed at all times. For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk... -
Page 5: Main Features
MAIN FEATURES SPECIFICATIONS Code Weight 33 kg Length 1220 mm Width 590 mm Height 1130 mm Width of Cut 360 mm Depth of Cut (6 positions) 0 - 20 mm Power 2.3 kW Knife blade Speed 3150 rpm Catcher Capacity 40 litre Noise and Vibration Information Guaranteed Sound Power = 93 dB(A) -
Page 6: Safety Precautions
This safety alert symbol indicates important safety messages. While scarifying, always wear substantial footwear and long be replaced immediately with a genuine Hayter replacement When you see this symbol be alert to the possibility of injury. trousers. Do not operate the equipment when barefoot or wearing part. -
Page 7: Maintenance & Storage
Operation cont Never touch the exhaust, exhaust guard or cooling fi ns when the Check the rear defl ector and collector bag frequently for wear Always replace worn or faulty parts with genuine Hayter parts. engine is hot. or deterioration. -
Page 8: Assembling The Scarifi Er Before First Use
Replace and tighten the dipstick. (Refer fi g.5 and 6) following items have been supplied correctly. If any items are handlebar and hook into position. Lower the rear defl ector to missing, contact your local Hayter dealer. rest on the collector bag. Fuel Type Purchase fuel in quantities that can be used in 30 days. -
Page 9: Operating The Scarifi Er
OPERATING THE SCARIFIER stop lever is released the engine will stop. Controls Operate all control levers several times and ensure that the cables To prevent damage, never pull the engine start grip when the move freely. Check that the engine stop lever returns freely to its engine is running. -
Page 10: Slopes
OPERATING THE SCARIFIER knife blade could become dangerous projectiles. Inspect the protect the cutting mechanism. Slopes area for hidden obstructions which when contacted by the knife blade could risk health and safety or result in damage Always stop the engine when a hidden obstruction or To prevent engine damage, do not use the Scarifi... -
Page 11: Maintenance Schedule
MAINTENANCE SCHEDULE Maintenance Schedule inner control cables at point of entry and exit from their outer casting. To prevent accidents, stop the engine and disconnect the spark plug lead before attempting to carry out procedures 50 Hours or Every Season on the Scarifi... -
Page 12: Scarifi Er Maintenance
SCARIFIER MAINTENANCE (Refer fi g.19) Carburettor Adjustments Refer to Assembling the Scarifi er Before First use. (Refer fi g.17) Do not use petroleum solvents. Never make adjustments to the carburettor. The carburettor was Do not use pressurised air. set at the factory to operate effi ciently under most conditions. Do Knife Blade Replacement not tamper with the governor spring, linkages, or other parts to Spark Plug Service... -
Page 13: Keeping Engine Clean
SCARIFIER MAINTENANCE Thoroughly clean the Scarifi er deck immediately after use Keeping Engine Clean To ensure your Scarifi er is maintained in good working order it and store well away from corrosive materials. is important that the following procedure is adopted. Remove all thatch debris from the engine including the exhaust, exhaust guard, the air ways in the top cowl and the surrounding Drain fuel from the engine by running the engine until it stops. -
Page 14: Trouble Shooting
Incorrect / contaminated fuel Drain tank and fi ll with correct used for hire, and will become invalid if non genuine Hayter parts are fi tted. This warranty does not fuel cover for minor mechanical adjustments unless they are due to defective material or workmanship. -
Page 15: Eu Privacy Statement
Hayter dealer. Your personal information will be processed by Hayter in the UK. It will also be entered into the Toro warranty system, which is hosted on servers located within the United States where privacy law may not provide the same protection as applies in your country. -
Page 16: Notes
NOTES... -
Page 17: Customer Information
CUSTOMER INFORMATION Date of Sale:- Engine Type:- Engine:- Hayter Limited Spellbrook, Bishop’s Stortford, Hertfordshire CM23 4BU England Tel: +44 (0)1279 723444 Fax: +44 (0)1279 600338 www.hayter.co.uk...