Removing the display
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the stand.
2
Remove the
3
Remove the
4
Remove the
5
Remove the
6
Remove the
7
Remove the fan.
8
Remove the microphone.
9
Follow the procedure from step 1 to step 4 in
10 Remove the
11 Remove the
12 Remove the
13 Remove the speakers.
14 Remove the
15 Remove the
16 Remove the
Procedure
After performing the steps in the prerequisites, we are left with the display
assembly.
84
computer. After working inside your
back
cover.
optical
drive.
hard
drive.
wireless
card.
heat
sink.
system
board.
VESA-mount
bracket.
speaker
cover.
control-buttons
board.
middle
cover.
rubber
feet.
After working inside your
"removing the
camera".