Replacing the rubber feet
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the rubber foot with the screw holes on the
display bezel.
2
Replace the screw that secures the rubber foot to the display assembly.
Post-requisites
1
Replace the
middle
2
Replace the
speaker
3
Replace the
VESA-mount
4
Replace the
system
5
Replace the fan.
6
Replace the
heat
7
Replace the
wireless
8
Replace the
hard
9
Replace the
optical
10 Replace the
back
11 Replace the stand.
computer. After working inside your
cover.
cover.
bracket.
board.
sink.
card.
drive.
drive.
cover.
After working inside your
83