Declaration Of Conformity - Bosch GSR 12 VE-2 Original Instructions Manual

OBJ_BUCH-199-004.book Page 21 Monday, August 17, 2009 8:32 AM
Noise/Vibration Information
Measured values determined according to
EN 60745.
GSR 12 VE-2/GSR 14,4 VE-2/GSR 18 VE-2:
Typically the A-weighted sound pressure level of
the product is 72 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
2
a =2.5 m/s , Uncertainty K =1.5 m/s
h
Screwdriving: Vibration emission value
2
a =2.5 m/s , Uncertainty K =1.5 m/s
h
GSB 12 VE-2/GSB 14,4 VE-2/GSB 18 VE-2:
Typically the A-weighted noise levels of the
product are: Sound pressure level 90 dB(A);
Sound power level 101 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
2
a =3.5 m/s , Uncertainty K =1.5 m/s
h
Impact drilling into concrete: Vibration emission
2
value a =13 m/s , Uncertainty K =1.5 m/s
h
Screwdriving without impact: Vibration emis-
2
sion value a =2.5 m/s , Uncertainty
h
2
K =1.5 m/s .
GSR 12 VE-2/GSR 14,4 VE-2/GSR 18 VE-2/
GSB 12 VE-2/GSB 14,4 VE-2/GSB 18 VE-2:
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
Bosch Power Tools
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
2
,
in conformity with the following standards or
standardization documents: EN 60745 accord-
2
.
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
2
,
2
,
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
20.07.2009
Assembly
Battery Charging
A battery that is new or has not been used for a
longer period does not develop its full capacity
until after approx. 5 charging/discharging cy-
cles.
To remove the battery 7 press the unlocking but-
tons 6 and pull out the battery downwards. Do
not exert any force.
English | 21
Dr. Eckerhard Strötgen
Head of Product
Certification
2 609 932 649 | (17.8.09)