RIDGID CM1450 Operator's Manual page 28

One World Technologies, Inc.
Hwy. 8
Pickens, SC 29671
Part No. SP6450
RIDGID¨ HAND HELD AND STATIONARY POWER TOOL
LIMITED THREE YEAR WARRANTY AND 90-DAY
SATISFACTION GUARANTEE POLICY
This product is manufactured by One World Technologies,
Inc., under a trademark license from Ridgid, Inc. All warranty
communications should be directed to One World Technolo-
gies, Inc., attn: RIDGID handheld and stationary power tool
technical service at (toll free) 1-866-539-1710.
90-DAY SATISFACTION GUARANTEE POLICY
During the first 90 days after the date of purchase, if you are
dissatisfied with the performance of this RIDGID tool for any
reason you may return the tool to the dealer from which it was
purchased for a full refund or exchange. To receive a replace-
ment tool you must present proof of purchase and return all
original equipment packaged with the original product. The
replacement tool will be covered by the limited warranty for
the balance of the three year warranty period.
WHAT IS COVERED UNDER THE LIMITED THREE YEAR
WARRANTY
This warranty covers all defects in workmanship or materials
in this RIDGID tool for the three year period from the date of
purchase. This warranty is specific to this tool. Warranties for
other RIDGID products may vary.
HOW TO OBTAIN SERVICE
To obtain service for this RIDGID tool you must return it,
freight prepaid, to an authorized RIDGID service center for
hand held and stationary power tools. You may obtain the
location of the authorized service center nearest you by call-
ing (toll free) 1-866-539-1710 or by logging on to the RIDGID
website at www.ridgid.com. When requesting warranty ser-
vice, you must present the proof of purchase documentation,
which includes a date of purchase. The authorized service
center will repair any faulty workmanship, and either repair or
replace any defective part, at our option at no charge to you.
WHAT IS NOT COVERED
This warranty applies only to the original purchaser at retail
and may not be transferred. This warranty only covers defects
arising under normal usage and does not cover any malfunc-
tion, failure or defect resulting from misuse, abuse, neglect,
alteration, modification or repair by other than an authorized
service center for RIDGID branded hand held and stationary
power tools. RIDGID, INC. AND ONE WORLD TECHNOLO-
GIES, INC. MAKE NO WARRANTIES, REPRESENTATIONS
OR PROMISES AS TO THE QUALITY OR PERFORMANCE
OF ITS POWER TOOLS OTHER THAN THOSE SPECIFI-
CALLY STATED IN THIS WARRANTY.
ADDITIONAL LIMITATIONS
To the extent permitted by applicable law, all implied warran-
ties, including warranties of MERCHANTABILITY or FIT-
NESS FOR A PARTICULAR PURPOSE, are disclaimed. Any
implied warranties, including warranties of merchantability or
fitness for a particular purpose, that cannot be disclaimed
under state law are limited to three years from the date of pur-
chase. One World Technologies, Inc. is not responsible for
direct, indirect, incidental or consequential damages. Some
states do not allow limitations on how long an implied war-
ranty lasts and/or do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations
may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from
state to state.
Stock No. CM1450
Serial No. ________ Model and serial numbers
may be found on a plate attached to the tool, on
top of the Cut-off Machine arm. You should record
serial number in a safe place for future use.
QUESTIONS OR COMMENTS?
CALL 1-866-539-1710
www.ridgid.com
Please have your Model Number and Serial
Number on hand when calling.
Form No. SP6450
Model No. CM14500
Printed in China 12/03