Select A Stitch - Pfaff Creative Sensation Pro II Owner's Manual

Select a stitch

To select a stitch, touch the actual stitch in the stitch
selection area (3). You can scroll through the list of
2b 2c 2d 2e
stitches by touching the arrows at the bottom of the
stitch selection area (4). The number of the actual
1a 1c 2a
1b
subcategory is shown in the lower right corner (A).
3
You can also select a stitch from the selection menu
(24), see page 3:4.
Your machine automatically gives you
recommendations for the selected stitch.
a) Presser foot recommendation
b) IDT™ system recommended
c) Stabilizer recommended
Some machine settings are indicated with a symbol
when activated in the settings menu.
4
a) Set for twin needle A
b) Set for stitch width safety
c) Set for dynamic spring foot free-motion
d) Set for spring foot free-motion
e) Set for sensormatic free-motion
Raise and lower the presser foot
Your machine features the automatic presser foot
up and extra lift button and the presser foot down
and pivot button.
To lower the presser foot, place the fabric under the
presser foot and press the presser foot down button
(C) or step on the foot control. To raise the presser
foot, press the presser foot up button (B) or press
the thread snips button (D) to cut needle and bobbin
thread and raise the foot. When the needle stops in
B C D
the down position, the presser foot raises to pivot
height.
You can also lower the presser foot and the needle
with your foot control. If you tap your foot control
once you will lower the presser foot. If you tap
the foot control a second time the needle will be
lowered into the fabric.
Note: With Needle down selected, when you stop sewing
and touch the presser foot up button the foot will raise
but the needle stays in the fabric. Touch presser foot up
again to raise the needle.
4:3