Pfaff Creative Sensation Pro II Owner's Manual page 24

machine out of the box and remove the outer
packaging and lift off the machine carrying
case.
2. Remove all other packing material and the
plastic bag.
3. Slide off the accessory tray and remove the
styrofoam inside.
Note: Styrofoam left in the accessory tray while sewing
may affect stitch quality. The styrofoam is for packing
purposes only and should be removed.
Note: Your creative sensation
embroidery machine is adjusted to provide the best stitch
result at normal room temperature. Extreme hot and cold
temperatures can affect the sewn result.
Connect to the
and the foot control.
Note: Before plugging in the foot control, check to ensure
that it is type "FR5" (see underside of foot control).
1. Pull out the cord from the foot control. Connect
the foot control cord to the front socket on the
bottom right side of the machine (1).
2. Connect the power cord to the rear socket on
the bottom right side of the machine (2). Plug
the cord into the wall socket.
3. Press the ON/OFF switch to ON to turn on
power and light (3).
1. Switch the main switch (3) off.
2. Unplug the cord from the wall socket and then
from the machine (2).
3. Unplug the foot control cord from the machine
(1). Pull the cord gently and release - the cord
will retract itself into the foot control.
4. Place all accessories in the accessory tray. Slide
the tray on to the machine around the free arm.
5. Place the foot control in the space above the free
arm.
6. Put on the hard cover.
2:2
pro II sewing and
™
power cord
3
For the USA and Canada
This sewing machine has a polarized plug (one
blade wider than the other). To reduce the risk
polarized outlet only one way. If the plug does
install the proper outlet. Do not modify the plug
in any way.
1 2