Using Your Cooktop; Lighting A Gas Surface Burner - Samsung NX58H5650WS Quick Start Manual

using your cooktop

LIGHTING A GAS SURFACE BURNER

Each of the five surface burners has a control
knob with settings from HI to LO and a LITE
position. The LITE position should only be used
to light a flame.
1. Push in and turn the control knob to the
LITE position. You will hear a "clicking"
sound indicating the electronic ignition
system is working properly.
2. After the surface burner lights, turn the
control knob to adjust the power setting of the surface burner and turn off the
electronic ignition system.
All surfuce burner ignitors spark at the same time when any of the surface burner
controls are turned to the LITE position. Never cook with a control set on LITE.
All surface burners can be manually lit during a power failure. Always use extreme
caution when manually lighting a surface burner.
2_ using your cooktop
Quick guide_NX58H56_DG68-00525A_EN+MES+CFR.indb 2 08/02/2014 12:16:06