Selecting a profile
This selection is only possible if a
profile has been allocated in addition
to the Miele standard profile.
Touch the arrow sensors until
is highlighted. Touch OK.
Select profile
Select the required profile with the
arrow sensors and touch OK.
The name of the current profile is
shown in the top left of the display.
Changing the name
This selection is only possible if a
profile has been allocated in addition
to the Miele standard profile.
Touch the arrow sensors until
is highlighted.
Change name
Touch OK.
Now proceed as described in
"Creating a profile":
– Select to delete a character,
– To enter new characters, select the
relevant character and confirm OK.
– Save the new name by selecting in
the display and touching OK.
Deleting a profile
This selection is only possible if a
profile has been allocated in addition
to the Miele standard profile.
Touch the arrow sensors until
is highlighted and
Delete profile
touch OK.
Use the arrow sensors to select the
profile you want to delete.
Touch OK.
A tick will appear beside the profile
and after a short while the profile will be
deleted.
Profiles
41