Honeywell CL25AE Owner's Manual page 22

USE & OPERATION
Swing / Ion
To switch between the SWING, ION & SWING+ION modes.
Press the ''SWING'' button. The indicator light on 'S' will come
on and the louvers will begin to move from right to left
automatically. Manually adjust the horizontal louvers to
change vertical airflow. To turn on the ionizer function, press
the SWING/ION button again and the ionizer functions starts
when the indicator on 'I' comes on. Both functions can also be
activated by sequential pressing of this button.
Tank Empty
Low Water Alarm
(Will activate in COOL Only mode)
The unit is equipped with a low water sensor. When water in
the tank is below the minimum level, you will hear 10 beeps
and the TANK EMPTY LED indicator will flash continuously.
At the same time, the power to the pump inside the unit will be
cut off to protect the life of the pump.
To disengage the alarm function, turn off the unit from the
power outlet. Fill the tank with water above the minimum level
and turn on the unit.
To turn off the alarm function and continue to use it in FAN
mode, turn off the unit and turn the unit on. If COOL button is
pressed again without filling the tank with water, low water
alarm will activate again.
10