Standard Horizon CP500 Owner's Manual page 17

PIN WIRE COLOR FUNCTION
1 BLACK No Connection
2 RED No Connection
3 GREEN NMEA Common
4 BLUE Port4 Input
5 BROWN Port4 Output
6 * GRAY Port5 Input
7 * WHITE Port5 Output
8 YELLOW No Connection
*
NOTE: RADAR Antenna connection (optional)
For Radar Installation instructions visit www.standardhorizon.com and click on Owner's
Manuals and click to down load files called Radar Installation Manual and Radar Operation
Manual.
VHF Connections
To connect the CP500 to a VHF, a port will be needed to be selected. Refer to the ACC 2
connections for a connection example.
The optional FF525 (or FF520) uses port 2 when connected and the optional Radar antenna uses
port 5. When these optional devices are connected use port 1, 2 or 4 Input and Output to connect
to the VHF radio.
Some manufacturers of DSC VHF's are not capable of receiving NMEA DSC sentences from the
CP500. Refer to the Owner's Manual and confirm the VHF can receive NMEA DSC and DSE
sentences.
VGA Video Output
The CP500 has:
· One VGA output
Allows connection to a compatible TV or monitor using the optional VGAC10
adapter cable.
Page 18
CONNECTION EXAMPLE
Common (ground) for NMEA devices
Connect to Output of NMEA device
Connect to Input of NMEA device. Default is NMEA-0183 with GLL, RMB, RMC and XTE sentences
Connect to Output of NMEA device
Connect to Input of NMEA device. Default is NMEA-0183 with GLL, RMB, RMC and XTE sentences
NOTE
CP500
R