Connector Panel - Sony RCP-750 Operation Manual

4 IRIS RELATIVE (iris relative) button
When the IRIS/MB ACTIVE button is lit, the iris
adjustment mode can be selected with this button.
Press and light up the button for Relative mode or
press so that it goes dark for Absolute mode.
When the IRIS/MB ACTIVE button is not lit, Relative
mode is automatically selected and this button is not
operative.
5 f-number display
Displays the f number of the current iris setting. When
the iris is closed, "CL" is displayed.
6 EXT (lens extender) indicator
Lights when a lens extender or digital extender is used.
7 SENS (sensitivity) control knob
Used for manual iris adjustment in Absolute mode.
This control is not operative when Relative mode is
selected.
See the table "Iris adjustment functions" on the previous
page.
8 COARSE control knob
Used for manual iris adjustment.
See the table "Iris adjustment functions" on the previous
page.
9 IRIS control
When the AUTO button is not lit, you can adjust the
iris manually by turning the control.
When the AUTO button is lit, the reference value for
automatic iris adjustment can be set in a range of ±1f
with this control.
See the table "Iris adjustment functions" on the previous
page.
0 Iris gauge
The white line on the gauge provides a click position
for the IRIS control. Turn the gauge to set the line to
the most frequently used iris position, and it can be
used as the reference for manual iris adjustment.
The gauge rotates infinitely in either direction. When
no click position is required, set the line outside the
rotation range of the IRIS control.
qa AUTO button
Press and light the button to automatically adjust the
iris according to the amount of input light.
When this button is lit, the reference value for
automatic iris adjustment can be set in a range of ±1f
with the iris control.
If you press the button when lit, it goes dark and
manual iris adjustment is enabled.

Connector Panel

1 CCU/CNU REMOTE connector
2 AUX REMOTE connector
REMOTE
CCU/CNU AUX
1 CCU/CNU REMOTE (camera control unit/
camera command network unit remote)
connector (8-pin)
Connect to the RCP/CNU connector of a camera
control unit or the RCP connector of a camera
command network unit.
2 AUX REMOTE (auxiliary remote) connector
(8-pin)
Connect to the RCP-700/701.
3 EXT I/O (external input/output) connector
(9-pin)
With expansion functions added, this connector
permits you to control an external device.
Caution
When installing this panel, provide a gap of 7 cm (3
inches) or more behind the connector panel to prevent
damage to cables.
3 EXT I/O connector
EXT I/O
11(E)