Starting The Programme; Progress Of Programme; Changing The Delay Time; Time Delay - Beko DPU 7340 X User Manual

Cleaning of filter drawer
Warning symbol flashes with certain intervals
to remind that the filter drawer needs to be
cleaned.
Loading door open
This warning symbol appears when the
loading door of the dryer is open.

Time Delay

Time Delay function allows you to delay the
startup of the programme up to 24 hours.
1. Open the loading door and put the
laundry in.
2. Select the drying programme, spin speed
and, if required, the auxiliary functions.
3. Press Time Delay buttons + and - to set
the desired time delay. The Time Delay
symbol will flash.
4. Press Start / Pause / Cancel button. The
Time Delay starts to count down. The
Time Delay symbol lights up. Start symbol
appears. The ":" in the middle of the
displayed delay time will start flashing.
C
Additional laundry may be loaded
/ taken out during the Time Delay
period. At the end of the Time
Delay countdown process, Time
Delay symbol disappears, drying
process starts and the programme
duration is displayed. The time on
the display is the total of normal
drying time and delay time.
Time Delay is activated by pressing the Start
/ Pause / Cancel button in the above display
image.
Dryer / User Manual

Changing the delay time

If you want to change the time during
countdown:
1. Press Start / Pause / Cancel button for 3
seconds to cancel the programme. Repeat
the Time Delay procedure for the desired
time.
2. Set the desired delay time with Time
Delay + and - buttons. The Time Delay
symbol will flash.
3. Press Start / Pause / Cancel button.
The Time Delay starts to count down.
The Time Delay symbol lights up. Pause
symbol disappears. Start symbol appears.
4. The ":" in the middle of the displayed
delay time will start flashing.

Cancelling the Time Delay

If you want to cancel the Time Delay
countdown and start the programme
immediately:
1. Press Start / Pause / Cancel button for 3
seconds to cancel the programme.
2. Press Start / Pause / Cancel button to
start the programme you have previously
selected.

5.9 Starting the programme

Press Start / Pause / Cancel button to start
the programme.
Start / Pause symbol will light up to indicate
that the programme has started and ":" symbol
between the remaining time will continue
flashing.

5.10 Progress of programme

Drying
Wardrobe
Iron
Progress of a running programme is indicated
on the display by means of a set of symbols.
At the beginning of each programme step,
the relevant symbol in the series of symbols
will light up and thus, at the end of the
programme, all symbols will remain lit up. The
rightmost symbol on the display indicates the
step being carried out.
Anti-
creasing
(Extra)
Ventilation
EN / 21