Removing Diverter Motor - KitchenAid KUDE20FB*0 Technical Education

COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
To remove the Diverter Motor:
1. Unplug dishwasher or disconnect power.
2. Remove 2 Torx screws, see figure 1.
3. Lift out, see figure 2.
Note: The diverter disc is keyed onto the motor shaft. The
diverter motor can be removed with out removing the diverter
disc first but to install the diverter motor, the diverter housing
must be removed to align the diverter disc to the motor shaft.
Grommet
Wash Motor
4-24 KitchenAid 2013 Stainless Steel Tall Tub Dishwasher
n

Removing Diverter Motor

Motor and Sump Assembly
Hose Assembly
(includes 2 clamps)
Remove 2 #10 Torx screws
Figure 1
Figure 2
Isolator
Latch &
Screw (3)
Sump and Seal