Removing Latch Assembly - KitchenAid KUDE20FB*0 Technical Education

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dishwasher or disconnect power.
2. Remove the outer panel from the door.
3. Remove the user interface from the door.
4. To remove latch assembly, insert a small flat-blade
screwdriver into the clip slots on each side of the latch.
Gently push in to release latch clips, see figure 1 and 2.

Removing Latch Assembly

Figure 1
Figure 2
4. Remove latch assembly from door. See figure 3.
5. Disconnect harness assembly.
KitchenAid 2013 Stainless Steel Tall Tub Dishwasher
COMPONENT ACCESS
Figure 4
Door Latch
Assembly
Figure 5
4-7
n