Removing Proscrub Manifold - KitchenAid KUDE20FB*0 Technical Education

Removing ProScrub
To Remove ProScrub® Manifold:
(available on some models)
1. Unsnap manifold from distribution tube.
2. Disconnect the manifold tube from the sump by lifting up,
see figure 1.
NOTE: Powerful fixed jets target water towards pots, pans, or
casserole dishes loaded in the back of the dishwasher.
Figure 1
Manifold and Diverter Disk
®
Accessing Diverter Disk
(stainless steel tub)
1. Unsnap distribution tube from tub clips. See figures 1 & 2.
2. Disconnect the feed tube from the diverter housing, see
figure 3.
KitchenAid 2013 Stainless Steel Tall Tub Dishwasher
COMPONENT ACCESS
Figure 1
Figure 2
Figure 3
continued next page . . .
n
4-15